自组了一台 i3-10305T 物理机, 找不到IP

#
# ### !!! WARNING - READ ME !!! ###
#
# DO NOT edit this file. This file has been generated automatically by the loader generator.
# If you were asked to use a pre-made image and asked by someone to edit this file DO NOT do it. The only
# supported method of obtaining the loader image is generating it using the loader generator provided.
#

terminal_output console
if serial --unit=0 --speed=115200; then
terminal_input --append serial_com0
terminal_output --append serial_com0
fi

set default="0"
set timeout="5"
set timeout_style="menu"

if [ -s $prefix/grubenv ]; then
load_env --file $prefix/grubenv --skip-sig
set has_env="1"
if [ -n "${saved_entry}" ]; then
set default="${saved_entry}"
fi
else
set has_env="0"
echo "WARN: failed to load env. Default choice will NOT be saved!"
fi


function savedefault {
saved_entry="${chosen}"
save_env --file $prefix/grubenv saved_entry
}


insmod usb_keyboard
insmod part_msdos
insmod ext2
insmod fat
insmod linux
insmod gzio

set gfxmode=auto
insmod vbe
insmod vga

# UEFI
insmod efi_gop
insmod efi_uga

insmod font
if loadfont ${prefix}/unicode.pf2
then
insmod gfxterm
set gfxmode=auto
set gfxpayload=keep
terminal_output gfxterm
fi

menuentry 'RedPill DS918+ v7.0.1-42218 (USB, Verbose)' {
savedefault
set root=(hd0,msdos1)
echo Loading Linux...
linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 vender_format_version=2 mac2=00123456 earlyprintk mac1=00123456 syno_hdd_powerup_seq=1 pid=0x88AA log_buf_len=32M syno_hw_version=DS918+ vid=0x88AA earlycon=uart8250,io,0x3f8,115200n8 sn=00123456 elevator=elevator root=/dev/md0 loglevel=15
echo Loading initramfs...
initrd /rd.gz /custom.gz
echo Starting kernel with USB boot
}

menuentry 'RedPill DS918+ v7.0.1-42218 (SATA, Verbose)' {
savedefault
set root=(hd0,msdos1)
echo Loading Linux...
linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 synoboot_satadom=2 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 vender_format_version=2 mac2=00123456 earlyprintk mac1=00123456 syno_hdd_powerup_seq=1 pid=0x0001 log_buf_len=32M syno_hw_version=DS918+ vid=0x46f4 earlycon=uart8250,io,0x3f8,115200n8 sn=00123456 elevator=elevator root=/dev/md0 loglevel=15
echo Loading initramfs...
initrd /rd.gz /custom.gz
echo Starting kernel with SATA boot
echo WARNING: SATA boot support on this platform is experimental!
}

 

这是我的那个文件 你把 PID VID改了 光改USB的就行吧 MAC1 mac2 SN 如果你有的话就该 你试试

 

谢谢你的檔, 我只修改了vid、pid、etif_num=1，已试了都是一样，不知道为什麽不能，網卡已改了i219lm，我主板有4個sata，我外置了一個4口SATA卡，但我沒有修改SataPortMap= SasIdxMap= DiskIdxMap=這3個參數.

我试了装PVE 不用物理机做法, 是可以的，但是要PVE直读硬盘有点麻烦，我不想这样，都是希望可以搅好物理机做法。

 

楼主你成功了吗？能告诉我最后的解决办法吗？

 

成功没有啊我打算

 

跟你一样，搜不到，我已折腾了一个月了，换了很多版本，启动起来就是搜不到到