1. 服务器/VPS/主机用户Telegram电报群: https://t.me/openos
    黑群晖 Synology Telegram电报群: https://t.me/nasfan
    排除公告

黑群晖二合一镜像(6.2.3-25426 和 6.1.7-Update3)设置向导、分区自动扩容

本帖由 xiaopiao2020-05-03 发布。版面名称:群晖 Synology DSM

  1. xiaopiao

    xiaopiao New Member

    注册:
    2020-04-27
    帖子:
    19
    分别是 6.2.3-25426 和 6.1.7-Update3,硬盘分区都是 GPT,启动方式都是 UEFI,如果主板不支持 UEFI 就别下载了。
    引导程序都是 Jun 的修改版本,6.2.3 用的是 1.04b 已替换驱动文件,6.1.7 用的是 1.02b。
    如果不在意硬件解码或者使用虚拟机,可以考虑用 6.1.7,这个可以锁定版本为 6.1.7。
    管理账户:自行设定(Set by yourself),登录密码:自行设定(Set by yourself)
    完成设置向导后,请手动重启一次设备,然后就可以对系统盘进行扩容。
    Restart the system after the setup wizard is completed, and then you can expand the partition.

    GPT 分区的制作方式要复杂一些,原本想另外发帖,但是觉得并没有意义。
    而且你会这些,估计都不需要二合一镜像,直接安装后 PE 搞定二合一启动。
    镜像不同于网上的版本,这个是 5G 的镜像,所以 8G 的盘也可写入。
    由于相对 14G 的版本少写入了 9G 的数据(虽然大部分是空白数据块),所以理论上写盘用时会相对快一些。
    [​IMG]
    写入方式可以是 Linux 系统的 dd 命令,或者 WinPE 系统使用 DiskGenius 的 Clone Disk(拷贝硬盘、复制硬盘)
    二合一镜像无法直接进行升级,这是二合一的通病,好处就是新版本发布之后即使手贱点了升级也会升级失败。
    百度链接:https://pan.baidu.com/s/1hEqQV-YVLRm5ENhlWFmhnw 提取码:xzmf
    Google 云盘:https://drive.google.com/drive/folders/1bxfKBWqXlS-PK55iZLwbxjV8AUDTLJ5O

    --- 以下内容已无作用(Archive content) ---

    关于扩容分区,网上有很多教程。
    需要注意的是,6.1.7 的扩容相对网上的办法多了一个步骤!
    [​IMG]
    [​IMG]
    Beginning Sector(开始扇区、起始扇区)必须是 9437184!否则进系统后不能识别。
    分区后面留不留 100M 并没有影响。
     
    最后编辑: 2020-05-17
    已获得 ninivivianxiwen_loveilovenas2x另外 2 人的点赞。
  2. kissssle

    kissssle Member

    注册:
    2018-05-29
    帖子:
    34
    菜鸟求问,直接硬盘引导不用U盘引导了吗?
     
  3. bluecatus

    bluecatus Member

    注册:
    2020-04-04
    帖子:
    30
    Please instruct me step by step resize from 6GB disk to disk more than 6GB (16GB).
    Thanks in advance.
     
  4. xiaopiao

    xiaopiao New Member

    注册:
    2020-04-27
    帖子:
    19
    Please enable the ssh service first, and then use the ssh tool to log in to Synology.
    Use sudo -i to switch to the root account, then enter fdisk /dev/sda to enter the disk management.
    In my case, my disk is sda, so please modify sda to your disk.
    If you do n’t know your disk, you can try sda, sdb, sdc, etc.
    If you enter p and press Enter, you can see the EFI System partition, this is your disk.
    Type d and press enter, type 5 and press enter or press enter directly, you will see Partition 5 has deleted.
    Next type n and press enter, type 5 and press enter or press enter directly, enter 9437184 and press enter.
    Note: The First sector must be 9437184, otherwise it cannot be discovered.
    Then type t and press enter, type 5 and press enter or press enter directly, type 21 and press enter.
    Finally, enter w and press Enter to save the partition table.
    Please restart Synology, and then you can expand the partition.
    [​IMG]
    [​IMG]
    -------------------------------------
    If you have DiskGenius software, you can try it.
    Right-click on the raid partition and click Delete Current Partition.
    [​IMG]
    Right-click on the free partition and click Create New Partition.
    [​IMG]
    In the Create New Partition window, select Linux RAID Partition in the File System Type, then click Advanced >>, and then change Beginning Sector to 9437184, then click OK to save, and finally click Save All to save the partition table.
    [​IMG]
    The content uses Google Translate, please forgive me if you do n’t understand.
     
    已获得 bluecatus 的点赞。
  5. xiaopiao

    xiaopiao New Member

    注册:
    2020-04-27
    帖子:
    19
    是的,不再需要优盘引导,现有系统也可以改造成二合一启动。
     
  6. bluecatus

    bluecatus Member

    注册:
    2020-04-04
    帖子:
    30
    [QUOTE = "xiaopiao, post: 24748, member: 52740"] . [/ QUOTE]

    Thanks so much for your detailed instruction. I totally understand.
    I think using DiskGenius will be easier.
     
    最后编辑: 2020-05-05
    已获得 astonbest 的点赞。
  7. ansonli

    ansonli New Member

    注册:
    2020-05-04
    帖子:
    1
    弱弱问一句,可以直接写进8G的U盘用来启动吗?
     
  8. chongzi0307

    chongzi0307 New Member

    注册:
    2020-04-18
    帖子:
    2
    求楼主分享一下 GPT 分区的制作方式,我自己遇到了很多问题,一直找不到解决办法。
     
  9. kof128

    kof128 Member

    注册:
    2018-06-26
    帖子:
    61
    谢谢分享,收藏一个
     
  10. qq714476521

    qq714476521 New Member

    注册:
    2020-05-12
    帖子:
    2
    单一硬盘,写入后虽然引导成功了但是无存储空间,按照扇区初始那些划分,也无存储空间, 重新创建直接又无引导了