1. 服务器/VPS/主机用户Telegram电报群: https://t.me/openos
    黑群晖 Synology Telegram电报群: https://t.me/nasfan
    排除公告

TS453Dmini引导分享DS920+ v7.0.1和v7.1.0,完美识别硬盘,顺序正常。

本帖由 SoraLike2022-05-01 发布。版面名称:群晖 Synology DSM

  1. SoraLike

    SoraLike Member

    注册:
    2018-04-05
    帖子:
    42
    我说的是dts里面的ata_port = <0x01>;
     
  2. zy0906

    zy0906 New Member

    注册:
    2021-12-23
    帖子:
    27
    同样机器 实体机装 没配到别的问题,唯独918的硬解和人脸不行,即使是docker的emby,驱动和显示都有,还是无法硬解....
     
    最后编辑: 2022-05-01
  3. fwhub

    fwhub New Member

    注册:
    2021-08-20
    帖子:
    23
    确实 所以我一直再研究920编译
    920可以 但目前就是引导一直编译不好
     
  4. fwhub

    fwhub New Member

    注册:
    2021-08-20
    帖子:
    23
    老哥 我这边把那个dts改了 为什么还是只识别两个硬盘 可以帮忙看一下吗?

    代码:
        [email protected] {
            protocol_type = "sata";
            power_pin_gpio = <0x14 0x0>;
            detect_pin_gpio = <0x23 0x1>;
            led_type = "lp3943";
    
            ahci {
    pcie_root = "00:13.0,00.0";
    ata_port = <0x0>;
            };
    
            led_green {
                led_name = "syno_led0";
            };
    
            led_orange {
                led_name = "syno_led1";
            };
        };
    
        [email protected] {
            protocol_type = "sata";
            power_pin_gpio = <0x15 0x0>;
            detect_pin_gpio = <0x24 0x1>;
            led_type = "lp3943";
    
            ahci {
    pcie_root = "00:13.0,00.0";
    ata_port = <0x1>;
            };
    
            led_green {
                led_name = "syno_led2";
            };
    
            led_orange {
                led_name = "syno_led3";
            };
        };
    
        [email protected] {
            protocol_type = "sata";
            power_pin_gpio = <0x16 0x0>;
            detect_pin_gpio = <0x25 0x1>;
            led_type = "lp3943";
    
            ahci {
    pcie_root = "00:12.0";
    ata_port = <0x0>;
            };
    
            led_green {
                led_name = "syno_led4";
            };
    
            led_orange {
                led_name = "syno_led5";
            };
        };
    
        [email protected] {
            protocol_type = "sata";
            power_pin_gpio = <0x17 0x0>;
            detect_pin_gpio = <0x26 0x1>;
            led_type = "lp3943";
    
            ahci {
    pcie_root = "00:12.0";
    ata_port = <0x1>;
            };
    
            led_green {
                led_name = "syno_led6";
            };
    
            led_orange {
                led_name = "syno_led7";
            };
        };
     
  5. zy0906

    zy0906 New Member

    注册:
    2021-12-23
    帖子:
    27
    是的是的 如果920可以 请一定告知下~~
     
  6. fwhub

    fwhub New Member

    注册:
    2021-08-20
    帖子:
    23
    920可以 你就编译引导改dts文件识别硬盘顺序就可以了 这不是楼主已经成功了吗
     
  7. ghxwzbc

    ghxwzbc New Member

    注册:
    2022-04-24
    帖子:
    17
    [email protected]里的ata_port = <0x1>;要改成ata_port = <0x2>;下面的[email protected]里改成ata_port = <0x3>;
     
  8. fwhub

    fwhub New Member

    注册:
    2021-08-20
    帖子:
    23
    好的 那我这边是重新改dts文件在tinycore下 再替换编译一遍就行 还是从头再来 最开始的流程是先编译7.01再编译7.1把?
     
  9. SoraLike

    SoraLike Member

    注册:
    2018-04-05
    帖子:
    42
    引导发首页了
     
  10. ghxwzbc

    ghxwzbc New Member

    注册:
    2022-04-24
    帖子:
    17
    我的不是这款,但是这样做的,记得编译的时候把硬盘都拔下来